TinyDX: A Palm-Sized HF Digital Modes Transceiver That Fits in Your Pocket
Portable amateur radio has come a long way over the past decade. Lightweight antennas, compact batteries, and software-defined radios have made it possible to set up an HF station almost anywhere. Even so, most digital-mode operators still carry a surprising amount of equipment—a transceiver, computer, interface cables, and a power source. TinyDX challenges that idea by stripping everything back to the essentials.
Created by Barbaros Aşuroğlu (WB2CBA), TinyDX is an open-source HF transceiver built specifically for weak-signal digital modes such as FT8 and FT4. Rather than trying to be an all-purpose radio, it concentrates on doing one task exceptionally well. The result is an incredibly compact transceiver that can be powered directly from a USB connection and used with a smartphone, tablet, or computer.

The project is a reminder that innovation in amateur radio doesn’t always mean adding more features. Sometimes it means asking what can be removed while still delivering an enjoyable operating experience.
A Radio Designed with a Clear Purpose
Many modern HF transceivers attempt to cover every operating mode imaginable, from SSB and CW to FM and digital voice. TinyDX follows a different philosophy. It was designed exclusively for digital communication, allowing every part of the hardware to be optimized for that single purpose.
Because FT8 and FT4 are highly efficient weak-signal modes, they don’t require high transmit power to achieve impressive results. TinyDX takes advantage of this by focusing on clean signal generation, low power consumption, and a compact form factor instead of high-output RF stages or complex user interfaces.
The finished radio measures only about 50 × 25 × 30 mm, making it one of the smallest complete HF digital transceivers available as an open-source project. Despite its size, it includes everything required for practical digital communication.
Ingenious Engineering Inside
One of the most impressive aspects of TinyDX is its internal construction. Instead of spreading the circuitry across a single printed circuit board, the designer uses a stacked PCB arrangement that allows several miniature boards to fit neatly together. This layered construction dramatically reduces the overall dimensions while keeping the design surprisingly modular.
At the heart of the radio is the familiar ATmega328P microcontroller, responsible for managing system control and communication. Frequency generation is handled by the reliable SI5351 synthesizer, while a Quadrature Sampling Detector forms the receiver section. Together with carefully designed filtering and RF amplification stages, these components provide a complete transceiver in a package smaller than many handheld radio accessories.
The project demonstrates how thoughtful engineering can achieve remarkable results without relying on expensive or exotic components.

Powered by Nothing More Than USB
One of TinyDX’s most attractive features is its simplicity. The radio operates from a standard 5-volt USB supply, eliminating the need for bulky power packs during casual portable operation. A USB power bank, laptop, or even a compatible smartphone can provide sufficient power for the radio.
This makes TinyDX particularly appealing for field activities where minimizing weight and equipment is important. Whether operating from a park, campsite, hilltop, or garden, the entire station can fit into a very small bag.
Built for FT8 and FT4
TinyDX was created with FT8 and FT4 in mind, two digital modes that have transformed HF operating over the last several years. Their ability to decode extremely weak signals allows successful communication using less than one watt of RF output under favourable conditions.
The radio can be used with popular software such as WSJT-X on Windows, FT8CN and FT8TW on Android, and iFTX on iOS devices. Since TinyDX appears as a standard USB audio device, connecting it to modern software is straightforward. Band selection is performed directly on the hardware, keeping the design simple while avoiding unnecessary complexity.
An Excellent Project for Home Constructors
TinyDX is much more than a finished radio; it is also an outstanding learning platform. Every aspect of the project has been released as open-source hardware. Builders have access to complete schematics, PCB layouts, firmware, assembly documentation, and manufacturing files, making it possible to reproduce the design or study the engineering decisions behind it.
Even builders who are not ready to solder miniature surface-mount components can take advantage of modern PCB manufacturing services, which can assemble most of the difficult components before delivery. This significantly lowers the barrier for amateur radio operators interested in constructing their own equipment.
Practical Performance
Although TinyDX transceiver produces less than one watt of transmit power, that should not be mistaken for poor performance. Digital modes such as FT8 routinely allow worldwide contacts using modest antennas and extremely low power levels.
Depending on the selected band and antenna system, operators can expect reliable regional communication and, when propagation is favourable, impressive long-distance contacts. Like any QRP station, success depends more on antenna quality and propagation than transmitter power alone.
TinyDX embraces the philosophy that efficient operating techniques often achieve more than simply increasing output power.
Why TinyDX Stands Out
The amateur radio community has produced countless homebrew transceiver projects over the years, but few combine portability, simplicity, and openness as effectively as TinyDX transceiver. It is not intended to replace a fully featured HF base station. Instead, it fills a unique niche for operators who enjoy experimenting with digital modes using equipment they have built themselves.
The project’s greatest strength lies in its balance. It is small without becoming impractical, simple without sacrificing capability, and inexpensive without compromising the educational value that makes home construction so rewarding.
Getting Started
If TinyDX has sparked your interest, the complete project is freely available online. The GitHub repository contains firmware, hardware design files, schematics, bill of materials, PCB layouts, and detailed build information.
Project Repository: https://github.com/WB2CBA/TinyDX—Tiny-Digital-Modes-HF-Transceiver
Developer’s Article: https://antrak.org.tr/blog/tinydx-my-quest-for-designing-the-smallest-digital-modes-hf-transceiver/
Reading the developer’s design notes provides valuable insight into the engineering challenges involved in creating such a remarkably compact transceiver and offers an appreciation for the careful thought behind every design decision.
TinyDX proves that a capable HF transceiver doesn’t have to be large or complicated. By focusing exclusively on FT8 and FT4, WB2CBA has created a radio that is remarkably compact, surprisingly capable, and completely open for the amateur radio community to study, improve, and enjoy.
Whether you’re an experienced homebrewer, a QRP enthusiast, or simply curious about modern digital radio design, TinyDX is well worth exploring. It represents the spirit of amateur radio experimentation—building something small, learning something new, and making contacts around the world with equipment you understand from the inside out.
Reference
-
TinyDX GitHub Repository – https://github.com/WB2CBA/TinyDX—Tiny-Digital-Modes-HF-Transceiver
-
JLCPCB Component Library – https://jlcpcb.com/parts/componentSearch
-
Mini-Circuits T2-613-KK81+ Datasheet – https://www.minicircuits.com/pdfs/T2-613-1-KK81.pdf
-
Arduino Bootloader Guide – https://docs.arduino.cc/built-in-examples/arduino-isp/ArduinoISP/
-
IFTX iOS Application – https://apps.apple.com/us/app/iftx/id6446093115
Related Posts
- Pebble HF: The $50 Open-Source QRP Transceiver That Wants to Get You on HF
- FT8 vs FT4: Choosing the Right Digital Mode for Weak Signal Success
- Real-World Feedback: Navigating the zBitx v2 Issues and Upgrades
- Mastering Meshtastic on the 70cm Amateur Band (433 MHz)
- The zBitx v2 Has Arrived: Efficiency, Built-in EFHW, and a Wi-Fi Revolution
Post Comment