The ATS Mini series represents one of the most innovative developments in pocket-sized DSP receivers for shortwave enthusiasts and ham radio operators. Built around the Silicon Labs SI4732 DSP chip and ESP32 microcontroller, these tiny radios pack remarkable functionality into an incredibly compact form factor. Let’s explore the technical evolution across all versions, from the original V1 to the latest V4. Built around the Si4732 chip and powered by an ESP32, each iteration has addressed hardware bottlenecks, from audio quality to RF interference
Tag: DIY radio
Discover the world of DIY radio on VU3DXR. Explore hands-on projects, from simple receiver builds to advanced homebrew transceivers. Access detailed schematics, soldering guides, and step-by-step tutorials designed for amateur radio enthusiasts looking to build, mod, and master their own RF gear.
Build a High-Sensitivity Regenerative Receiver with 2N7000 MOSFET
The 2N7000 regenerative receiver is a classic single-transistor radio that combines simplicity with surprisingly high sensitivity. By using controlled positive feedback, the circuit operates just below oscillation, dramatically increasing gain and selectivity.
VHF Collinear J-Pole : The DIY Super J-Pole Antenna
Build a VHF Super J-Pole (collinear J-pole) antenna by stacking two half-wave elements with a phasing stub for ~3 dB gain over a standard J-pole. Omnidirectional, low-angle radiation vertical ideal for 2 m repeaters and long-range VHF communication
5/4 Wave VHF Antenna for 145 MHz Using 450-Ohm Ladder Line
Build a 5/4-wave VHF antenna for 145 MHz using 450 Ω ladder line and a choke feed. Shows how to mount, feed, and match this high-gain vertical for FM, repeater, and simplex operations on the 2 m band
ATS Mini Web Interface: Features, Setup & Browser-Based Radio Control
Explore ATS Mini, the ESP32-based DSP radio, and ats mini web interface . Learn features, spectrum analyzer, memory control, and setup guide.
LARCSet kit – Most Affordable SSB/CW Transceiver Kit Released
LARCSet is a $39 open-source 40 m SSB/CW transceiver kit from HF Signals delivering 5 W QRP output with simple BITX-style architecture. Beginner-friendly build-it-yourself radio designed to make affordable HF operation accessible to new and homebrew amateur radio operators.
Build Your Own High-Res FM Receiver: The DIY CYD 480×320 FM Radio Project
DIY ESP32-S3 CYD 480×320 FM radio with SI4732 DSP and touchscreen tuning. High-resolution Arduino receiver project with scan and preset features.
Turning the NXP TEF6686 Car-Radio Chip into a Versatile Multiband Receiver]]
From Car Dash to SDR Lab: Turning the NXP TEF6686 Car-Radio Chip into a Versatile Multiband Receiver There’s a certain magic in hearing distant AM or FM stations fade in from the noise — a reminder of how much can be done with clever design and a bit of curiosity. Recently, hobbyists have discovered that […]
H.J. Berndt’s Firmware for the ATS-Mini DSP Radio
A deep dive into H.J. Berndt’s alternative firmware for the ATS-Mini. Learn about the new UI, AFC improvements, and how to flash this powerful update to your DSP receiver.
LILYGO T-Embed ESP32 SI4732 Radio: In-Depth Technical Analysis & User Review
In-depth review of the LILYGO T-Embed ESP32-S3 SI4732 multiband DSP radio covering hardware architecture, reception performance, firmware ecosystem, and real-world usability for makers, SWL, and ham radio enthusiasts.

