Simple two stage one watt AM transmitter
This simple two-stage AM transmitter uses an oscillator and a transistor RF amplifier to deliver…
The QRP section is dedicated to low‑power HF and VHF operating, with a heavy focus on simple transmitters, minimalist transceivers, and practical on‑air results. Here you’ll find classic designs like the Mighty Mite, OXO transmitter, Mosquito TRX, and modern SDR‑based rigs such as sBitx and ZBitx tuned for portable use, all built around parts that are easy to source and experiment with. Articles emphasise repeatable circuits, clean keying, stable oscillators, and output filters so that your 1–5 W signal is both efficient and pleasant to copy at the other end
This simple two-stage AM transmitter uses an oscillator and a transistor RF amplifier to deliver…
Build a Simple Series Modulated AM QRP HF Transmitter for the 40m or 80m bands.…
Build a functional "Ten-Minute" QRP Transmitter with this simple DIY guide. Featuring a minimal component…
G4RAW 80M QRP CW Transmitter: The original version was built on tag strip, hence the…
This pippin QRP transmitter is basically a conventional colpitts type crystal oscillator with output taken…
The above 7 Mhz 5 Watts CW Transmitter circuit was found in one of back…
Build a versatile 7MHz QRP Transmitter capable of both CW and AM modulation. This DIY…
[embed]https://youtu.be/3mbQ03wsIAM[/embed] Belgaum net in 7050 khz Monitored in my GEK 2X HF Transceiver at…
ubitx3 with nextion display [embed]https://youtu.be/RO5WtXrJfWU[/embed] Demo of ubitx3 with nextion display reception in my shack.…
ubitx3 with nextion screen [embed]https://youtu.be/pTWXYJ6Ghrc[/embed] Reception test of my ubitx v3 multiband SSB Transceiver with…