80 meter 1W QRP Transmitter with Ceramic Resonator Control
Simple 80 m CW transmitter using a 3.58 MHz ceramic resonator for frequency stability and…
The QRP section is dedicated to low‑power HF and VHF operating, with a heavy focus on simple transmitters, minimalist transceivers, and practical on‑air results. Here you’ll find classic designs like the Mighty Mite, OXO transmitter, Mosquito TRX, and modern SDR‑based rigs such as sBitx and ZBitx tuned for portable use, all built around parts that are easy to source and experiment with. Articles emphasise repeatable circuits, clean keying, stable oscillators, and output filters so that your 1–5 W signal is both efficient and pleasant to copy at the other end
Simple 80 m CW transmitter using a 3.58 MHz ceramic resonator for frequency stability and…
Build the Commando AM transmitter — a crystal-controlled three-transistor AM circuit with oscillator, buffer, and…
Learn to build a simple 80M CW transmitter with crystal oscillator and parallel power amplifier.…
The Grenade AM transmitter is a fascinating DIY electronics project that combines simplicity with effective…
This blog post delves into the construction of a 40M AM transmitter. Perfect for hobbyists…
This simple AM transmitter uses a crystal-controlled oscillator and transistor stages to generate and amplify…
This simple CW transmitter uses a 74HC240 buffer IC as both oscillator and driver to…
This micro power AM transmitter uses a crystal-controlled oscillator and a 2N2222 transistor stage to…
This series-modulated AM transmitter uses a simple low-power design where the audio signal is applied…
This Class C AM transmitter uses a high-efficiency amplifier where the transistor conducts for less…