4:1 UN-UN Transformer for End-Fed Antennas
Build a 4:1 un-un impedance transformer to match end-fed wire antennas to 50 Ω coax.…
“DIY” on DXR Electronics Bits is where practical ham radio projects come to life. Here you’ll find buildable circuits, antennas, receivers, preamps, audio tools, and experimental rigs designed for real‑world shack and field use. From compact HF antennas for small spaces to regenerative receivers, QRP transmitters, and uBITX add‑ons, each article focuses on parts you can actually source and solder on the bench.
Build a 4:1 un-un impedance transformer to match end-fed wire antennas to 50 Ω coax.…
Build a 5/4-wave VHF antenna for 145 MHz using 450 Ω ladder line and a…
The 3-Element Yagi antenna is a fantastic project for any radio amateur looking for a…
Build a broadband FM Bazooka (sleeve dipole) antenna for 88–108 MHz with low noise, stable…
Build a Slim-Jim antenna optimized for 88–108 MHz FM broadcast reception. This ¾-wave vertical with…
The Bazooka coaxial dipole is a broadband antenna using coax cable as both radiator and…
Stacked 5/8-wave VHF Antenna for 2-meter band (146 MHz). Learn design theory, dimensions, tuning method,…
The W5GI multiband collinear antenna combines wire radiators and coaxial phasing sections to deliver reliable…
Basics of radio frequency by building a simple 1 MHz AM Transmitter. This guide explains…