Microphone Pre-Compressor Circuit for SSB Transceivers
Clean, punchy audio is critical for effective SSB communication, especially when operating QRP or low-power…
“DIY” on DXR Electronics Bits is where practical ham radio projects come to life. Here you’ll find buildable circuits, antennas, receivers, preamps, audio tools, and experimental rigs designed for real‑world shack and field use. From compact HF antennas for small spaces to regenerative receivers, QRP transmitters, and uBITX add‑ons, each article focuses on parts you can actually source and solder on the bench.
Clean, punchy audio is critical for effective SSB communication, especially when operating QRP or low-power…
Simple microphone preamplifier with diode clipper to boost and limit SSB audio for amateur radio…
DIY 300 Ω twin-lead J-pole antenna for the 2 m band offering efficient VHF performance,…
Build a simple twin-lead J-pole antenna for VHF/UHF using 300-ohm ribbon cable. This end-fed half-wave…
Compact multiband HF dipole covering 10–80 m using symmetrical loading coils and coax matching section.…
High-gain 435 MHz UHF collinear antenna using three 5/8-wave vertical sections with inductive phasing. Provides…
Build a VHF Super J-Pole (collinear J-pole) antenna by stacking two half-wave elements with a…
Operating on 80m, 40m, and 20m from a small backyard is no longer a challenge.…