Sleeve Dipole Antenna Design Using Coaxial Cable – A Technical Deep Dive
Master the construction of the high-performance Sleeve Dipole antenna using only coaxial cable. This technical…
“DIY” on DXR Electronics Bits is where practical ham radio projects come to life. Here you’ll find buildable circuits, antennas, receivers, preamps, audio tools, and experimental rigs designed for real‑world shack and field use. From compact HF antennas for small spaces to regenerative receivers, QRP transmitters, and uBITX add‑ons, each article focuses on parts you can actually source and solder on the bench.
Master the construction of the high-performance Sleeve Dipole antenna using only coaxial cable. This technical…
Learn how to build a simple high-gain collinear antenna using coaxial cable for VHF/UHF amateur…
Discover the RW4HFN balcony antenna design for the 20-meter amateur radio band—ideal for limited spaces.…
The RA9SUS simple loop is a compact HF antenna covering 14–30 MHz using a 4.7…
Full-size Delta Loops for the 40-meter band normally require around 42 meters of wire—often impossible…
Compact 4 m shortened vertical antenna for the 80 m band using a 64 µH…
Compact dual-band RW4HFN antenna covering 145 MHz (2 m) and 430 MHz (70 cm) with…
The broadband butterfly (bi-square) antenna uses two connected square loops to deliver stable 50–75 Ω…
Common-mode currents are a well-known enemy of clean RF communication. When RF travels along the…