Electronics and Technical resources from vu3dxr
Recently i got a ubitx V6.1 transceiver at lamakan 2024 event and kept the same idle due to mqth commitments. Later i decided to fire the rig during the week end. Unfortunately, the experince was not good. Audio is too chirpy and unpleasant to hear. But Tx audio is good as per other hams reports. …
SSM2167 Microphone Preamplifier with compression for ubitx HF Transceiver This DIY project idea based on the small board module “SSM2167 Microphone Preamplifier Board Preamp Compression Module DC 3V-5V” widely available on eBay and Aliexpress. Mic gain is barely adequate on the µBITx transceiver since there is no Mic Gain control. It would also be helpful …
VK3YE’s AGC circuit for ubitx An ubitx AGC board is a circuit board that can be installed in a ubitx transceiver to provide automatic gain control (AGC). AGC is a feature that automatically adjusts the gain of the transceiver’s amplifier to maintain a constant audio output level, regardless of the strength of …
Belgaum HF net reception monitored in my ubitx3 Receiver – Ubitx v3 Transceiver, 66 ft Endfed Halfwave antenna
Demo of ubitx v3 + nextion display reception in my shack.
ubitx3 with nextion screen Reception test of my ubitx v3 multiband SSB Transceiver with Nextion 2.8 inch touch screen. Barbaros WB2CBA has modified his stock µBITx v6 kit to use the Nextion 2.8″ TFT LCD display.To help his fellow Ubitx V6 owners who want to use a nextion display in their rig, Barbaros has provided …