Building an FT8 Digital Interface – Dive into Digital Modes
This FT8 digital interface connects a computer to a transceiver using a USB sound card,…
“DIY” on DXR Electronics Bits is where practical ham radio projects come to life. Here you’ll find buildable circuits, antennas, receivers, preamps, audio tools, and experimental rigs designed for real‑world shack and field use. From compact HF antennas for small spaces to regenerative receivers, QRP transmitters, and uBITX add‑ons, each article focuses on parts you can actually source and solder on the bench.
This FT8 digital interface connects a computer to a transceiver using a USB sound card,…
This simple CW transmitter uses a 74HC240 buffer IC as both oscillator and driver to…
This micro power AM transmitter uses a crystal-controlled oscillator and a 2N2222 transistor stage to…
From a fellow ham radio enthusiast, I recently acquired a refurbished Dell OptiPlex 980. My…
This article explains a terminated mini loop antenna designed for small spaces, combining loop geometry…
The uBITX V6.1 is a popular amateur radio transceiver kit. It's designed for ham radio…
The LM1458 is a dual operational amplifier (op-amp) that finds applications in audio amplification and other…
The compact, low-cost condenser mic amplifier described here give good-quality audio of 0.5 watts at…
This dual-microphone noise cancellation circuit uses two microphones placed back-to-back, with one signal inverted and…
This series-modulated AM transmitter uses a simple low-power design where the audio signal is applied…